Soluble Angiopoietin Receptor Tie-2 In Patients With Acute Myocardial Infarction And Its Detection By Optical Protein-Chip

The Tie-2 receptor has been shown to play a role in angiogenesis in atherosclerosis. The conventional method assaying the level of soluble Tie-2 (sTie-2) was ELISA. However, this method has some disadvantages. The aims of this research are to establish a more simple detection method, the optical protein-chip based on imaging ellipsomtry (OPC-IE) applying to Tie-2 assay. The sTie-2 biosensor surface on silicon wafer was prepared first, and then serum levels of sTie-2 in 38 patients with AMI were measured on admission (day 1), day 2, day 3 and day 7 after onset of chest pain and 41 healthy controls by ELISA and OPC-IE in parallel. Median level of sTie-2 increased significantly in the AMI patients when compared with the controls. Statistics showed there was a significant correlation in sTie-2 results between the two methods (r=0.923, P0.01). The result of this study showed that the level of sTie-2 increased in AMI, and OPC-IE assay was a fast, reliable, and convenient technique to measure sTie-2 in serum.

直接甲醇燃料电池阳极催化剂及甲醇氧化稀土助催化剂剂研究

燃料电池以其高效、环境友好的发电方式，被誉为21世纪的能源技术。其中，直接甲醇燃料电池（DMFC）更以燃料甲醇来源丰富，价格低廉，储存、携带方便而成为近年的研究热点。但是，DMFC在其实用化之前还需要解决一些重要问题，其中的关键之一就是高性能的贵金属催化剂的研究。我们知道，甲醇的电化学活性要低于氢气三个数量级；而且甲醇在R表面进行电化学氧化时，其中间解离吸附产物会造成贵金属催化剂中毒，显著降低了催化剂的活性。因此，要使DMFC具有相当高的电流密度和运行稳定性，就需要对贵金属催化剂制备进行不断的研究和改进。在本文的工作中，主要从Pt/C催化剂的制备方法、新型碳纳米管载体、稀土助催化剂等三个方面进行了研究和探索，取得的具体结果如下：1．Pt／C催化剂制备方法的研究与改进（1）在本组已有的研究结果基础上，对预沉积还原法进行了一些改进，采用原子吸收光谱（AAS）进行表征，发现Pt的利用率得到了明显的提高。采用X射线衍射。（RD）、透射电子显微镜（TEM）和BET表征铂的粒径、晶态结构和催化剂特性，分析表明，经过改进的预沉积还原法制备的催化剂仍然具有良好的分散性、较小的粒径、较低的晶态结构和良好的催化剂特性，电化学测试证明其性能要优于同等的E-TEK催化剂。（2）借鉴冶金学中的相关技术，提出了一种新的Pt/C催化剂制备方法一程序升温焙烧法。该方法的具体步骤增强了金属催化剂粒子和碳载体之间的相互作用力，提高了碳载体的导电性，并且形成了部分有利于催化反应进行的活性晶态结构。得到的R／C催化剂获得了近似E-TEK催化剂的催化活性，在具体方法上仍有改进的潜力。采用了同（1）的催化剂表征方法。2．甲醇电化学氧化稀土助催化剂研究在直接甲醇燃料电池Pt/C催化剂的研究过程中，一个重要的方面就是助催化剂的研究，并且已经得到了较好的结果。本工作选用了稀土元素为研究对象，因为稀土元素属于过渡金属，具有丰富的d电子轨道，易于和金属形成强的类化学键的吸附作用，并且能够和有机小分子形成多种配位化合物。经过初步的工作，发现了有些稀土离子如Sm3+能够在Pt表面吸附并且对甲醇电化学氧化具有较稳定的促进作用，采用循环伏安法，计时电流，交流阻抗等电化学方法进行了表征。根据实验结果，对其反应机理进行了初步的探讨。3．碳纳米管（CNTs）作为贵金属催化剂载体的研究碳纳米管（CNTs）由于其结构上的特殊性（径向尺寸为纳米量级，轴向尺寸为微米量级）而表现出典型的一维量子材料，同时具有较高的机械强度和超常的电学性能，能够为化学反应提供纳米级的反应场所，因此受到了化学界包括电化学研究人员的极大关注。已经在作为贵金属催化剂载体方面进行了一些研究，本工作的主要内容就是针对Pt/CNTs催化剂对碳纳米管的要求，对其预处理方法进行了改进，采用了如（1）中的催化剂表征方法和（2）中的相关电化学方法进行测定，发现碳纳米管作为贵金属催化剂载体时，对它的纯化处理方法的不同明显地影响了其载体性质和催化剂的活性。

Electro-mass multi odor sensor

For an olfactory sensor or electronic nose the task is not only to detect the object concentration, but also to recognize it. It is well known that all the elements can be identified by their charge to mass ratio e+/m. We tried to use this principle for molecular recognition. Two kinds of sensors are used simultaneously in testing. One is Quartz Crystal Microbalance (QCM) for detecting the change in mass, the other is Interdigital Electrode (IE) for detecting the change in conduction. In this paper the principle and the feasibility of this method are reported. The preliminary results on the recognition of alcohols are presented. The multisensor can be used as an instrument for research on material properties and kinetic process as well.

Electro-mass olfactory multi-sensor (EMMS)

For an olfactory sensor or electronic nose, the task is not only to detect the object concentration, but also to recognize it. It is well known that all the elements can be identified by their charge to mass ratio e(+)/m. We tried to imitate this principle for molecular recognition. Two kinds of sensors are used simultaneously in testing. One is quartz crystal microbalance (QCM) for detecting the change in mass, the other is interdigital electrode (IE) for detecting the change in conduction, as an electro-mass multi-sensor (EMMS). in this paper, the principle and the feasibility of this method are discussed. The preliminary results on the recognition of alcohol by EMMS coated with lipids are presented. Meanwhile, the multi-sensor can also be used as an instrument for research on some physico-chemistry problems. The change in conduction of coated membrane caused by one absorbed molecule is reported. It is found that when a QCM is coated with membrane, it still obeys the relationship Delta F (frequency change of QCM) = K Delta m (mass change of absorbed substance) and the proportional coefficient, K, depends not only on quartz properties but also on membrane characteristics as well. (C) 2000 Elsevier Science S.A. All rights reserved.

Electrodeposition of platinum nanoclusters on type I collagen modified electrode and its electrocatalytic activity for methanol oxidation

We firstly reported a novel polymer matrix fabricated by type I collagen and polymers, and this matrix can be used as nanoreactors for electrodepositing platinum nanoclusters (PNCs). The type I collagen film has a significant effect on the growth of PNCs. The size of the platinum nanoparticles could be readily tuned by adjusting deposition time, potential and the concentration of electrolyte, which have been verified by field-emitted scanning electron microscopy (FE-SEM). Furthermore, cyclic voltammetry (CV) has demonstrated that the as-prepared PNCs can catalyze methanol directly with higher activity than that prepared on PSS/PDDA film, and with better tolerance to poisoning than the commercial E-TEK catalyst. The collagen-polymer matrix can be used as a general reactor to electrodeposit other metal nanostructures.

Physical and electrochemical characterizations of PtRu/C catalysts by spray pyrolysis for electrocatalytic oxidation of methanol

In this paper, it was reported that the carbon-supported Pt-Ru(Pt-Ru/C) catalyst used as the anodic catalyst in the direct methanol fuel cell (DMFC) was synthesized with a two-step spray pyrolysis (SP) method using the Pt and Ru metal salt as the precursors and polyethylene glycol (PEG) with the different molecular weights (Mw= 200,600,and 1000 analytical reagent) as cosolvent. PEG as a cosolvent plays a crucial role in producing PtRu/C catalysts. It was found that the Mw of PEG could affect the electrocatalytic activity of Pt-Ru and the morphology of the Pt-Ru particles in the Pt-Ru/C catalysts prepared with this method. When the Mw of PEG is 600, the Pt-Ru particles in the Pt-Ru/C catalyst prepared with this method possess the small average size, narrow size distribution, uniform dispersion, and high electrochemically active specific surface area. The electrocatalytic activity of the Pt-Ru/C catalyst prepared with this method using the cosolvent PEG with Mw = 600 for the methanol oxidation is much higher than that of the commercial E-TEK Pt-Ru/C catalyst. Therefore, the two-step SP method is an excellent method for the preparation of the Pt-Ru/C catalyst used in DMFCs.

合金化程度对炭载Pt-Ru催化剂性能的影响

在含四氢呋喃(THF)的水溶液中,室温下用NaBH4还原H2PtC l6和RuC l3制得Pt-Ru/C催化剂.其Pt-Ru粒子的合金化程度较高,平均粒径较小,相对结晶度较低.因此对甲醇氧化的电催化活性远高于Pt-Ru粒子的平均粒径和相对结晶度相似的,而且Pt-Ru合金化程度低的商业化的E-TEK的Pt-Ru/C催化剂,表明Pt-Ru的合金化程度对Pt-Ru/C催化甲醇氧化的电催化活性有很大的影响.

胶态Pt/C催化剂对甲醇的电催化氧化性能

研究了Pt金属载量为20%的碳载胶态Pt金属催化剂对甲醇的电催化氧化性能,并与E TEK公司同类型催化剂进行了比较。X衍射光谱(XRD)和透射电镜(TEM)研究显示在胶态Pt/C催化剂中,Pt粒子的平均粒径为3.8nm,并且具有良好的均一度。电化学研究显示:尽管胶态Pt/C催化剂拥有相对较小的电化学活性面积,但对甲醇的电催化氧化性能却明显优于E TEK公司的Pt/C催化剂,其原因应归结于利用有机溶胶法制得的胶态Pt/C催化剂拥有更合理的平均粒径。

PEMFC催化剂的研究:自制Pt/C电催化剂的性质

研究了一种用于质子交换膜燃料电池(PEMFC)的自制Pt/C电催化剂(标记为THYT-1)的物理化学和电化学性质.将THYT-1电催化剂与E-TEK公司的同类电催化剂的组成、形态及电催化性能进行了比较.单电池测试结果显示,THYT-1的电催化性能优于E-TEK电催化剂.CV测试结果表明CO在这两种电催化剂上的电氧化性能相近;TEM分析表明两种催化剂上Pt晶粒在炭载体上呈均匀分布,平均粒径均为2～3nm;XPS和XRD测试结果表明两种催化剂中Pt主要以金属态存在.这些数据表明THYT-1催化剂的物理化学性质与E-TEK公司的相类似.

Investigation of platinum utilization and morphology in catalyst layer of polymer electrolyte fuel cells

Platinum utilization in the gas-diffusion catalyst layer and thin-film catalyst layer is investigated. The morphology of PTFE and Nafion in a simulated catalyst layer is examined by scanning electronmicroscopy (SEM) and transmission electron microscopy (TEM). The results show that the platinum utilization of the thin-film catalyst layer containing only Pt/C and Nafion is 45.4%. The low utilization is attributed to the fact that the electron conduction of many catalyst particles is impaired by some thick Nafion layers or clumps. For the gas-diffusion (E-TEK) electrode, the platinum utilization is mainly affected by the proton conduction provided by Nafion. The blocking effect of PTFE on the active sites is not serious. When the electrode is sufficiently impregnated with Nafion by an immersion method, the platinum utilization can reach 77.8%. Transmission electron micrographs reveal that although some thick Nafion layers and clumps are observed in the Pt/C + Nafion layer, the distribution of Nafion in the catalyst layer is basically uniform. The melted PTFE disperses in the catalyst layer very uniformly. No large PTFE clumps or wide net-like structure is observed. The reactant gas may have to diffuse evenly in the catalyst layer. (C) 1999 Elsevier Science S.A. All rights reserved.